Queclink GL502MG
LTE Waterproof Tracker with 10-Year Standby Time
Queclink Gl502MG
The Queclink GL502MG represents a cutting-edge solution for asset tracking, specifically designed for trailers and containers. Engineered with an IP68 rating, it exhibits exceptional durability in demanding environments. Flexible installation options, encompassing simple placement, secure spiking, and magnetic mounting, facilitate seamless deployment. Equipped with a high-capacity 57000 mAh battery and user-replaceable options, the GL502MG minimizes maintenance requirements and ensures prolonged operational lifespan. Furthermore, advanced connectivity features, including Bluetooth Low Energy and Wi-Fi scanning, provide robust location tracking capabilities, even in challenging environments with limited GNSS signal availability.
Rugged Durability
Long-lasting Power
Flexible Installation
Key Features
Robust Connectivity: Global LTE Cat M1/NB2 with 2G fallback ensures reliable communication using a unique antenna solution for optimal signal reception.
Exceptional Battery Life: Up to 10-year standby time minimizes maintenance and maximizes operational efficiency.
Rugged Durability: Waterproof and dustproof construction (IP68) withstands harsh environmental conditions.
Advanced Connectivity: Supports Bluetooth Low Energy (BLE) 5.2 for seamless integration with other devices and Wi-Fi positioning for enhanced location accuracy.
Tailored for Critical Applications: Ideal for tracking high-value assets, trailers, and containers, providing reliable and continuous monitoring.
Eagle-IoT: The one-stop solution for managing your Queclink GL502MG Tracker
Technical Specification
LTE Specifications
Operating Band
Cat M1:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
Cat NB2:
LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85,
Data Transmission
eMTC (DL) 375 Kbps
eMTC (UL) 375 Kbps
NB2 (DL) 127 Kbps
NB2 (UL) 158.5 Kbps
NB1 (DL) 32 Kbps
NB1 (UL) 70 Kbps
EGPRS Specifications
Frequency
EGPRS 850 / 900 / 1800 / 1900 MHz
Data Transmission
GPRS: (DL) 107Kbps, (UL) 85.6Kbps
EDGE: (DL) 296Kbps, (UL) 236.8Kbps
GNSS Specifications
GNSS Type
u-blox All-in-One GNSS receiver
Sensitivity
Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP)
Autonomous: < 2.5m
TTFF (Open Sky)
Cold start: 27s average
Warm start: 27s average
Hot start: 1s average )
General Specifications
Dimensions
250 × 58 × 61mm
9.84’’(L) × 2.28’’(W) × 2.40’’(H)
Weight
719g (25.36oz)
Internal Battery
57000mAh, Lithium thionyl chloride battery
Standby Time
1 report/ day : up to 10 years
6 reports/ day : up to 6 Years
5 minutes reporting: 3 months
*The standby time is estimated under the condition of operating with LTE CAT M1/NB-IoT and the CSQ is greater than 15, working at a constant ambient temperature of 25°C and reporting once a day without any sensors.
Operating Temperature
-20℃ ~ +60℃
BLE
Support BLE 5.2 protocol
Buffer Messages
Up to 10,000 buffer messages
Waterproof
IP68 compliant
Internal Temperature Sensor
Built-in temperature sensor
Interface
Battery Switch
Used for power on/off (Internal only)
SIM Access
Internal only (3FF SIM)
USB Type-C
Used for firmware upgrading and debug (Internal only)
WiFi Antenna
Internal only
BLE Antenna
Internal only
Cellular antenna
Internal only
LED indication
CEL ,GNSS, PWR
Air Interface Protocol
Working Modes
Power saving mode for long standby time
Continuous mode for emergency tracking
Command Set
Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Working Modes
Support up to 20 internal geo-fence regions
Scheduled Timing Report
Alarm when internal battery is low
Geo-fences
Support up to 20 internal geo-fence regions
Low Power Alarm
Alarm when internal battery is low
Wakeup Report
Report when the device wakes up
Motion Detection
Intelligent adjustment of reporting frequency
