GV350MG
|
GV350MG
- BLE 5.0 (Opti)
- Multiple I/O Interfaces
- 1-wire Interface
- 2 RS232 Serial Ports
- J1939 Bus Port
- OTA Control
- Scheduled Timing Report
- Geo-fences
- Crash Detection
- Driving Behavior Monitoring
- Tow Alarm
- Fuel Level Monitoring
- Support Temperature Sensor
- Magnetic mounting (Optional)
- Driver ID Identity
- Region – Worldwide
- Network/Operating Band – Cat M1/Cat NB1:
B1/B2/B3/B4/B5/B8/B12/B13/B18/
B19/B20/B25/B28
EGPRS:
850/900/1800/1900MHz - GNSS Type – u-blox All-in-One
GNSS receiver - Position Accuracy (CEP) – Autonomous: < 2.5m
- Certificate – CE/FCC/Verizon/E-mark/Anatel
Digital Inputs | 1 positive trigger input for ignition detection 3 negative trigger inputs for normal use |
Digital Output | 1 digital output, open drain, 150 mA max drive current |
Latched Digital Output | 1 digital output with internal latch circuit, open drain, 150 mA max drive current |
Configurable Input/Output | 1 special I/O can be configured as a 0V-32V analogue input or an open drain output with 150 mA max drive current |
Serial Ports | 2 RS232 serial ports on 16 pin Molex type connector, for external devices (GARMIN protocol support) |
CAN Bus Interface | CAN 2.0A/B, SAE J1939 |
1-wire Interface | Support 1-wire temperature sensor and iButton driver ID(maximum 8 channels) |
Cellular Antenna | Internal only |
GNSS Antenna | Internal antenna and optional external antenna |
BLE Antenna | Internal only |
LED Indicators | CEL, GNSS, PWR |
Mini USB Interface | Used for upgrading and debugging |